Paint Curing Heaters
Portable Infrared &
Paint Curing Heaters
Medium-wave infrared heat panels and spot heaters for paint curing, collision repair, and portable industrial heating — built for professional use.
TPI's portable infrared heaters are designed for environments where targeted, fast-response heat is critical — auto body and collision repair shops, industrial finishing operations, and anywhere you need professional-grade portable heat without permanent installation. All models ship to Canadian addresses and are priced in CAD.
Common Applications
Products in This Collection
The TPI HP Series are heavy-duty portable infrared heat panels built for professional paint curing, collision repair, and industrial finishing. Gold anodized aluminum reflectors deliver up to 10% faster cure times than standard polished reflectors — a meaningful difference in high-volume auto body operations. Units reach full operating temperature in under 2 minutes, with adjustable hinges for precise heat targeting.
Model Specifications
| Catalog # | Model | Watts | Volts | Amps | Heat Sources | Cable Type | Width (in) | Height (in) | Heated W (in) | Heated H (in) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 08841202 | HP-5-QT | 4,800 | 240 | 20 | 4 | 12-3 SO | 44¾ | 56½ | 40 | 44 | 116 |
| 08841302 | HP-6-QT | 6,400 | 240 | 26.7 | 4 | 12-3 SO | 66¾ | 56½ | 61 | 44 | 141 |
| 08841402 | HP-11-QT | 11,200 | 240 | 46.7 | 7 | 6-3 SO | 66¾ | 89½ | 61 | 77 | 225 |
General Curing Guidelines (distance: 18–24" from target)
| Material Type | Curing Time |
|---|---|
| Solvent-Based Primer | 3–5 min |
| Water-Based Primer | 3–6 min |
| 2-Component Primer | 8–20 min |
| Water-Based Clear Coat | 3–10 min |
| Acrylic Enamel & Polyurethane Clear Coat | 12–30 min |
| Urethane Clear Coat & High Solids Top Coat | 10–30 min |
Curing times vary depending on material and shop conditions.
The TPI PCH-48C is a compact, plug-in portable infrared spot heater suited for paint curing, clear coat flash-off, and targeted spot heating in body shops and finishing operations. At 1,500W on standard 120V power, it requires no dedicated circuit — plug into any standard outlet and start working immediately. Height adjusts from 2' to 6' for versatile positioning on any panel or surface.
Specifications
| Catalog # | Model | Watts | BTUs | Volts | Phase | Weight (lbs) | |
|---|---|---|---|---|---|---|---|
| 08841110 | PCH-48C | 1,500 | 5,120 | 120 | 1 | 30 | |
| 04914502 | Replacement Element Assembly | — | — | ||||
Physical Dimensions
| Width | Height Range | Depth |
|---|---|---|
| 53" | 2' – 6' (adjustable) | 28" |
Why Medium-Wave Infrared for Paint Curing?
Medium-wave infrared heaters penetrate the surface of coatings rather than heating the surrounding air — which means faster, more uniform cure times and less risk of blistering or overheating the finish. This is particularly important for water-based clear coatings, which are increasingly required under environmental regulations across Canada and the U.S.
Unlike short-wave infrared (which can overheat sensitive surfaces) or convection heat (which relies on ambient air temperature), medium-wave infrared delivers controlled, directed energy directly to the coating — making it the standard choice in professional auto body and finishing operations.
TPI's HP Series uses gold anodized reflectors, which direct more usable energy to the target surface than standard polished aluminum — a practical advantage in high-volume or time-sensitive finishing environments.
Need Help Choosing the Right Model?
Not sure whether the HP-5, HP-6, HP-11, or PCH-48C is right for your shop or project? We're happy to help — all quotes in CAD.
